CY8CKIT-062S2-43012 PSoC 62S2 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28109 Rev. *E
6
General Safety Instructions
ESD Protection
ESD can damage boards and associated components. Cypress recommends that you perform
procedures only at an ESD workstation. If an ESD workstation is unavailable, use appropriate ESD
protection by wearing an anti-static wrist strap attached to a grounded metal object.
Handling Boards
CY8CKIT-062S2-43012 PSoC 62S2 Wi-Fi BT Pioneer Kit is sensitive to ESD. Hold the board only by
its edges. After removing the board from its box, place it on a grounded, static-free surface. Use a
conductive foam pad, if available. Do not slide the board over any surface.
Regulatory Compliance Information
The CY8CKIT-062S2-43012 PSoC 62S2 Wi-Fi BT Pioneer Kit contains devices that transmit and
receive radio signals in accordance with the spectrum regulations for the 2.4-GHz and 5-GHz
unlicensed frequency range.
Cypress Semiconductor Corporation has obtained regulatory approvals for this kit to be used in
specific countries. These countries include the United States (FCC Part 15), Canada (IC RSS210),
and Japan (JRF/TELEC). Additional regional regulatory agency approval may be required to operate
these throughout the world.
This kit, as shipped from the factory, has been tested and found to comply with the limits and
requirements for the following compliances:
■
As a Class B digital device, pursuant to part 15 of the FCC Rules.
■
As a Class B digital apparatus, compliant with Canadian ICES-003.
CAUTION:
Only the antenna(s) that were certified with the module may be used.
Other antennas may be used only if they are of the same type and have
the same or lower gain.
The manufacturer is not responsible for any radio or television
interference caused by unauthorized modifications to this equipment.
Such modifications could void the user's authority to operate the
equipment.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from