
CY8CKIT-062S2-43012 PSoC 62S2 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28109 Rev. *E
13
Introduction
P7[4]
GPIO on non-Arduino
header IO15 (J21.8)
CapSense Shield
Remove R155 to disconnect from IO15
(J21.8).
Populate R38 to connect to CapSense
Shield.
P7[5]
Arduino D8 (J3.1)
–
–
P7[6]
Arduino D9 (J3.2)
–
–
P7[7]
CapSense CMOD
–
–
P8[0]
GPIO on non-Arduino
header (J22.5)
–
–
P8[1]
CapSense Button0
TX
GPIO on non-Arduino
header IO8 (J21.1)
Remove R24 to disconnect from CapSense.
Populate R144 to connect to GPIO on non-
Arduino header.
P8[2]
CapSense Button1
TX
GPIO on non-Arduino
header IO9 (J21.2)
Remove R25 to disconnect from CapSense.
Populate R143 to connect to GPIO on non-
Arduino header.
P8[3]
CapSense Slider0
RX
GPIO on non-Arduino
header IO10 (J21.3)
Remove R28 to disconnect from CapSense.
Populate R142 to connect to GPIO on non-
Arduino header.
P8[4]
CapSense Slider1
RX
GPIO on non-Arduino
header IO11 (J21.4)
Remove R29 to disconnect from CapSense.
Populate R152 to connect to GPIO on non-
Arduino header.
P8[5]
CapSense Slider2
RX
GPIO on non-Arduino
header IO12 (J21.5)
Remove R30 to disconnect from CapSense.
Populate R153 to connect to GPIO on non-
Arduino header.
P8[6]
CapSense Slider3
RX
GPIO on non-Arduino
header IO13 (J21.6)
Remove R31 to disconnect from CapSense.
Populate R151 to connect to GPIO on non-
Arduino header.
P8[7]
CapSense Slider4
RX
GPIO on non-Arduino
header IO14 (J21.7)
Remove R32 to disconnect from CapSense.
Populate R149 to connect to GPIO on non-
Arduino header.
P9[0]
Extended Arduino A8
(J2.2)
ETM TRACEDATA[3] Remove R125 to disconnect from J2
header.
Populate R126 to connect to ETM Trace
header.
P9[1]
Extended Arduino A9
(J2.4)
ETM TRACEDATA[2] Remove R124 to disconnect from J2
header.
Populate R127 to connect to ETM Trace
header.
P9[2]
Extended Arduino
A10 (J2.6)
ETM TRACEDATA[1] Remove R123 to disconnect from J2
header.
Populate R128 to connect to ETM Trace
header.
Table 1-1. Pioneer Board Pinout
(continued)
Pin
Primary On-board
Function
Secondary On-board
Function
Connection details
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from