CYP PUV-1620A-RX, Руководство по эксплуатации

Страница: 30 / 68

30
■ Edit Name:
Click the “Edit Name” button to open a window that
allows changing the name of the User EDID. Click the “Save” button
within the window to confirm the change.
2) Output EDID:
■ Download:
To save the EDID from the connected display to your
local PC, select the sink from the dropdown list then press the
“Download” button. Depending on your browser settings you will
either be asked where to save the downloaded file, or the file will
be transferred directly to the default download location on your
PC.
3) Input EDID: This section provides controls for assigning EDID to
the unit’s inputs. Selecting “Appoint” allows for different EDID to be
assigned to each individual input, selecting “ALL” allows for a single
EDID to be assigned to all inputs.
■ EDID Selection:
Click on the preferred input(s) to open the EDID
Table List window. Multiple inputs can be selected at once, if
desired. Select the new EDID source to use and the change will
occur immediately.
Note: In most cases, assigning a new EDID to an input will cause the
affected input to briefly blink out while the source adapts to the new
information.
This unit provides the following 6 default EDIDs:
Unit’s default EDIDs
FHD/PCM/2CH
1920×1080p@60Hz (4.95Gbps) & 8-bit colour, LPCM
2.0
FHD/PCM/MCH
1920×1080p@60Hz (4.95Gbps) & 8
-
bit colour, LPCM
7.1 & Bitstream
UHD/PCM/2CH 3840×2160p@30Hz (10.2Gbps) & Deep Colour
(8/10/12-bit), LPCM 2.0
UHD/PCM/MCH
3840×2160p@30Hz (10.2Gbps) & Deep Colour
(8/10/12-bit), LPCM 7.1 & Bitstream
UHD
+
/PCM/2CH 3840×2160p@60Hz (18Gbps) & Deep Colour (8/10/12-
bit), LPCM 2.0
UHD
+
/PCM/MCH
3840×2160p@60Hz (18Gbps) & Deep Colour (8/10/12-
bit), LPCM 7.1 & Bitstream