6
1. INTRODUCTION
Transmitter
This HDMI to HDMI/HDBaseT Scaling Transmitter can send uncompressed
audio/video along with control, Ethernet, and extra audio data over a
single run of Cat.5e/6/7 cable up to 100m. Both the HDMI input and
local HDMI output support video signals up to 4K@60Hz (4:4:4, 8-bit). For
transmission over the HDBaseT output the signal can be converted to
4K@60Hz (4:2:0, 8-bit) or 1080p@60Hz, if necessary, in order to fit within
HDBaseT bandwidth limitations.
Simple 18Gbps HDMI test patterns are also available to be output. Control
of remote devices is possible via bi-directional RS-232 or IR as well as via
a LAN connection. A balanced analog audio output provides users with
additional audio flexibility. The 48V PoH design can power the connected
Receiver (PD), eliminating the need for an extra power supply while the
Transmitter itself is powered through the local 24V power supply.
Receiver
This HDBaseT to Dual HDMI Scaling Receiver can receive uncompressed
audio/video along with control, Ethernet, and extra audio data over a
single run of Cat.5e/6/7 cable up to 100m. While the HDBaseT input is
limited to a maximum of 4K@60Hz (4:2:0, 8-bit), this unit can automatically
convert or scale the input to output at 4K@60Hz (4:4:4, 8-bit) depending
on the detected capability of the connected display.
Simple 18Gbps HDMI test patterns are also available to be output for
easy testing of local equipment. Control of remote devices is possible via
bi-directional RS-232 or IR as well as via a LAN connection. Digital OAR
(Optical Audio Return) support at 48kHz and a balanced analog audio
output provides users with additional audio flexibility. The 48V PoH design
can receive power from the connected Transmitter (PSE), eliminating the
need for a local power supply, however power via 5V power supply is also
supported if needed.