CYP PUV-1082-PRO, Руководство по эксплуатации

Страница: 53 / 100

53
Command Format
<Command> {Port1}+{Port2}+{Etc.} {Param1 [= Value]}, {Param2 [=
Value]}, {Etc.} & {Port1}+{Port2}+{Etc.} {Param1 [= Value]}, {Param2 [=
Value]}, {Etc.} & Etc.
Example
HDBT_Out A+C+E VideoSrc=HDMI_In 2, AudioSrc=CoaxIn 2 & B+D
Mute & F VideoSrc=HDMI_In 1, AudioSrc=HDMI_In 1
8) Complex Multi-Slot/Parameter Command Format (ZoneAvPair)
The ZoneAvPair command can also control multiple slots with
multiple parameter groupings however the syntax is slightly different.
Each command can only affect a single port at a time. Each additional
set of slots/parameters are separated by the “&” character.
Command Format
ZoneAvPair HDBT_Out {Port} Slot {Slot1}+{Slot2}+{Etc.}
{Param1=Value}, {Param2=Value} & Slot {Slot1}+{Slot2}+{Etc.}
{Param1=Value}, {Param2=Value} & Etc.
Example
ZoneAvPair HDBT_Out B Slot 1 VideoSrc=HDMI_In 2,
AudioSrc=CoaxIn 1 & Slot 2+3+4 VideoSrc=HDMI_In 2,
AudioSrc=AnalogIn 1 & Slot 5+6 VideoSrc=HDMI_In 1,
AudioSrc=HDMI_In 1 & Slot 1 Load