CYP PUV-1082-PRO, Руководство по эксплуатации

Страница: 13 / 100

13
treble, bass, volume and audio delay adjustments can be set in the
WebGUI.
Note: LPCM 2.0 or analogue stereo sources only.
5 EXTENDED AUDIO OUT 1~4 PORTS:
Four sets of stereo analogue
audio outputs. These audio ports are capable of independently
outputting audio routed from any audio source within the matrix.
Audio mixing, treble, bass, volume and audio delay adjustments can
be set in the WebGUI.
Note: LPCM 2.0 or analogue stereo sources only.
6 ANALOGUE AUDIO IN 1~4 PORTS:
Accepts unbalanced analog audio
from sources such as DVD players, PCs, MP3 players, etc. These audio
sources can be paired with the video from any HDMI input or can
be mixed with another audio source. Audio mixing can be set in the
WebGUI.
7 DIGITAL AUDIO IN 1~2 PORTS:
Accepts digital audio (LPCM 2.0 only)
from sources such as Blu-ray players, game systems, PCs, etc. These
audio sources can be paired with the video from any HDMI input or
can be mixed with another audio source. Audio mixing can be set in
the WebGUI.
8
IR IN (ALL) PORT: Connect an IR extender to this port for IR signal
reception. All IR signals received will be broadcast by all IR blasters
connected to the matrix or connected HDBaseT receivers. Please
ensure that the remote being used is within direct line-of-sight of the
IR extender.
IR OUT (ALL) PORT:
Connect an IR Blaster to this port to broadcast
IR signals. All IR signals received by any IR extenders connected to
the matrix or HDBaseT receivers will be broadcast. Please place the IR
Blaster in direct line-of-sight of the equipment to be controlled.
9 CAT AUDIO I/O 1~2 PORTS:
Can send/receive audio to/from
connected compatible CAT Audio devices via standard Cat.5e cable.
This connection allows audio to be sent to/from the matrix over
greater distances than would normally be possible via standard
cables.
Note: 48kHz audio can be transmitted up to 300m, 96kHz audio can be
transmitted up to 150m and 192kHz audio can be transmitted up to
100m.