CYP PUV-1082-PRO, Руководство по эксплуатации

Страница: 15 / 100

15
6.4 Remote Control
1 POWER BUTTON:
Press to power the unit on or place
it into stand-by mode.
2
LOCK BUTTON: Press to lock/unlock the front panel
of the matrix unit.
3
MUTE BUTTON: Mutes Zone Audio outputs.
Note: HDBaseT audio can only be muted when an
independent, non-HDMI, audio source has been routed
to the output.
4 IN 1~10, OUT A~J & PATTERN BUTTONS:
[Local matrix control]
When controlling the unit
directly, input and output selection behaves the same
as the front panel buttons with the “Pattern” button
acting as an additional test pattern source.
Note: Refer to section 6.1 for more details.
[Zone A/V Pairing]
When controlling the unit via an HDBaseT receiver
in a remote location, pressing buttons 1~10 will switch to the A/
V source assigned to the number depending on your current zone.
These assignments are configured via the WebGUI.
Note: Refer to section 6.7.8 for more details.
5 MENU/CANCEL BUTTON:
Press the “MENU/CANCEL” button to enter
the OLED menu, or to back out from menu items.
6 PRESET BUTTON:
Recall matrix presets. Press the “Preset” button
followed by a number button to recall the stored preset assigned to
that number. The presets are configured within the WebGUI.
7 +/IN BUTTON:
Within the menu, this button moves you up within
the menu tree. Otherwise, in routing mode, this button allows you to
make your input source selection.
−/OUT BUTTON:
Within the menu, this button moves you down
within the menu tree. Otherwise, this button starts routing mode and
allows you to begin your output destination selections.
◄
/VOL− &
►
/VOL+ BUTTONS:
Adjusts the volume of zone audio.
ENTER BUTTON:
Press this button to confirm selections.
Note: This remote control is designed for the full family of matrix products.
Some functions are not available on all units.
POWER LOCK MUTE
CR-163
MENU/
CANCEL PRESET +/IN
/VOL+ /VOL- ENTER
-/OUT
PATTERN
1/A 2/B 3/C
4/D 5/E 6/F
7/G 8/H 9/I
10/J
1
4
6
7
2
3
5