CYP PU-22HC, Руководство по эксплуатации

Страница: 8 / 16

⑤
CAT6 IN: These slots are for connecting the Video/DDC input to the
Video/DDC output of the transmitter unit with CAT6 cables.
[Note]:
1. Cable tested with CAT-6E / 23AWG / Solid and therefore, cable with
different specifi cation may result in different distance.
2. Cable distance tested with equipment PS3 40G and 37" SamSung 12
bits LCD TV.
3. Figures provided in this manual are reference fi gures only, actual fi gures
may depend on source and display use with cable specifi cation.
⑥
DC 5V: This is the slot where you insert the 5V DC power supply for
electrical power before plugging the adaptor to an AC wall outlet.
7.1 Rear Panel
1 2
3
4
5
6
①
CAT6 OUT: Connect the Video/DDC output to the Video/DDC input of
the receiver unit using CAT6 cables.
②
HDMI OUT: Connect HDMI output port to the HDMI display.
③
HDCP indicators: When the input source is with the HDCP protection the
HDCP LED will illuminate.
④
SYNC Indicator: The LED will illuminate when the HDMI or DVI source had
been connected.
⑤
HDMI/CAT6 input indicator: The LED will illuminate when the HDMI or
CAT6 source is selected.
⑥
Link OUT: The LED will illuminate when the display had been connected.
55
8. RJ-45 Pin Defi nitions
Pin Video DDC
1 TX2+ DDC Bus Clock
2 TX2- NC
3 TX1+ DDC Bus Data
4 TX0+ Power 5V
5 TX0- GND
6 TX1- IR IN
7 TXC+ HPD
8 TXC- C EC
6