8
6.4.3 Settings Tab
This tab provides convenient access to control over all input, output, and
display configuration functions of the unit. At the top of the page is a Sync
icon (
) that can be clicked on to force the software to resynchronize with
the unit, if necessary.
1) Input Port Section:
This section contains controls for renaming inputs
and selecting the input source type used by input groups 1 and 2. If a
source is not currently detected as active, the port icon will be replaced
with a No Sync icon ( ).
Rename Inputs:
To rename any input, double click on the input’s
name, above the icon. This will open the “Rename” dialog window.
Type in the preferred new name, up to 32 characters long, and then
click “OK”.
Note: Group 1 and 2 input names can only be changed when they are
active as the current source for that group.
Input Group 1/2 Source:
To change the currently active
source for Group 1 or 2, right click on the associated
section to open up the source selection window then
select a new source from the 4 available options.
2) Multiview Output A/B Sections:
This section provides control over the
multiview layouts for HDMI outputs A and B as well as output resolutions,
audio source selection, and proc-amp settings for each individual
multiview window.
