CYP IP-CS7, Руководство по эксплуатации, Страница: 9 / 36

9
6 USB:
Connect a USB mouse and keyboard to control the unit’s
WebGUI as seen via the HDMI output port. Firmware update via USB is
also supported.
7
LAN 2: Connect directly, or through a network switch, to your PC/
laptop to control the unit via WebGUI/Telnet.
8 LAN 1 (PoE):
This port is used to connect to the Video over IP (VoIP)
devices to be controlled. Connect to the VoIP units’ private network,
either directly or through their dedicated network switch, to enable
detection and control over those units.
Note 1: Typically the VoIP device network is contained within in a separate
subnet or, more frequently, in a physically separate network.
Note 2: If the connected network switch supports the IEEE 802.3af-2003
PoE (Power over Ethernet) standard, this unit can optionally be powered
directly via this Ethernet port.
9 DC 5V: Plug the 5V DC power adapter into the unit and connect it to
an AC wall outlet for power. (Optional, not required if the unit is pow-
ered via PoE).
6.3 Remote Control
1 MACRO 1~12:
Press any of the 12 buttons to activate
the saved preset assigned to that number.
2
1
3
4
5
6
8
7
9
10
11
12
CR-183
MACRO
1