CYP IP-CS7, Руководство по эксплуатации, Страница: 6 / 36

6
1. INTRODUCTION
This controller is a powerful and flexible solution for controlling multiple
Video over IP (VoIP) extenders within same network. The user only needs
to install this unit into the same local network as the extenders (Transmit-
ter and Receiver) to easily define and configure channel routing selec-
tions, for both unicast and multicast scenarios, using the WebGUI. It is also
possible to define and switch routes using customised groups or presets
allowing for easy control over multiple video zones. Without the use of
this centralised unit, each individual Transmitter and Receiver in the sys-
tem would need to be controlled and configured directly through their
own WebGUI.
Additionally, this unit supports controlling the matrix and video wall
modes of connected VoIP units. The settings of all connected Transmit-
ter/Receiver units, including IP address, netmask and extender status are
clearly displayed within the WebGUI. The WebGUI is easily accessed via a
web browser over a normal network connection or by directly connecting
an HDMI display and USB keyboard & mouse to the unit. A trigger input
interface is also provided to allow the easy addition of a remote control
keypad, or other trigger-supporting products, which can be installed
within a podium or within a table in a conference room or classroom. This
interface can allow the user to activate pre-defined functions or presets
with the simple press of a button. Standard control is available via Web-
GUI (remote or local), RS-232, Telnet and IR Remote.
2. APPLICATIONS
Video/TV wall display and control
Security surveillance and control
Commercial advertising, display and control
Home Theaters with Smart Home Controls
Retail sales and demonstration
3. PACKAGE CONTENTS
1×IP Master Controller
1×5V/2.6A DC Power Adapter
1×Terminal Block (3-pin)