CYP IP-CS7, Руководство по эксплуатации, Страница: 11 / 36

11
6.6 Telnet Control
Before attempting to use Telnet control, please ensure that both the unit’s
LAN 2 port and the PC/laptop are connected to the same active networks.
To Access the Command Line Interface (CLI)
Windows 7 Click Start , type “cmd” in the search field, and press
Enter .
Windows XP Click
Start
>
Run
, type “cmd”, and press
Enter
.
Mac OS X Click
Go
>
Application
s >
Utilities
>
Terminal
.
Once in the CLI (Command Line Interface) type “telnet” followed by the
IP address of the unit and “23”, then hit “Enter”. This will connect us to the
unit we wish to control. Type “help” to list the available commands.
Note 1: By default the unit will obtain the LAN 2 IP address via DHCP. If you
are unsure of the unit’s current LAN 2 IP address, please check the unit’s HDMI
status display.
Note 2: Commands will not be executed unless followed by a carriage return.
Commands are not case-sensitive.
Note 3: If the unit's IP address is changed then the IP address required for
Telnet access will also change accordingly.