CYP IP-7000TXWP, Руководство по эксплуатации, Страница: 30 / 52

25
COMMAND
Description and Parameters
set_device_name N1

Set the name of the unit.
N1
= {Name} [29 characters max, ASCII only]
get_device_name

Show the unit’s current device name.
factory_reset N1

Perform a factory reset on the unit and select the IP mode after the
reset completes.
Available values for
N1
:
0 [Reset into Static IP mode]
1 [Reset into Auto IP mode]
reboot

Reboot the unit.
get_ipconfig

Show the unit’s current IP configuration.
set_ip_mode N1

Set the unit’s IP configuration mode.
Available values for
N1
:
0 [Static IP mode]
1 [DHCP mode]
2 [Auto IP mode]
get_ip_mode

Show the unit’s current IP configuration mode.
set_ip_address N1

Set the unit’s static IP address.
N1
= X.X.X.X [X = 0~255, IP address]