CYP IP-7000TXWP, Руководство по эксплуатации, Страница: 16 / 52

11
3) Utilities Window:
The Utilities window allows users to reset the unit
back to the factory defaults by clicking “Factory Default”. The unit may
be rebooted (without resetting settings) by pressing the “Reboot”
button. If requested by technical support, you may also enable
logging by clicking the “Log Message” checkbox.
If the EDID received from the primary receiver unit (selected via
a checkbox on the preferred receiver in multicast mode) has
compatibility issues with the connected source, a basic internal HDMI
EDID (up to 4K30 w/audio) or basic VGA EDID can be selected. Please
press “Apply” after making the selection.
Note: This EDID setting will be reset if the unit is rebooted.
Finally, individual Telnet commands may be sent to the unit by using
the “Console API Command” text entry field and pressing “Apply”. Any
responses from the unit will be displayed in the “Output” field.