Note (PC):
Available only when PC is selected as input.
To adjust picture quality, Use "+,-" to move the highlight bar to your desired adjust
item, press the Menu/Enter to confirm your selection.
At this point, the selected parameter will turn red, you can then use +,- to
increase or decrease the value of the parameter.
When adjustment is complete, press "Menu" to leave the parameter. Move the
highlight bar to "Exit", then press Menu/Enter to exit.
Note:
The "H-position" and "V-position" are only available when component or PC
input is selected. Neither are available when the DVI input is selected.
Picture mode
-there are 4 picture modes for customer to choose from.
User:
Select to adjust to your favorite setting and store it.
Standard:
Standard factory default setting for optimal display in a normal
environment.
Vivid:
High saturation picture for optimal display in a bright room.
Movie:
Picture for comfortable low brightness display in a dark room.
Scale:
select overscan when input source is SD or HD video to ensure no black
band around screen border. Select underscan when input source is PC
signal to ensure full picture content fall within screen border.
Noise Reduction:
This function only works when input is analog RGB or
component. It will not work for DVI input. There are four steps of
Noise Reduction-Off, Low, Middle High. The Noise Reduction will
remove the noise that results from analog to digital conversion
and digital scaling processing.
H & V position:
To adjust for best horizontal and vertical position of the picture
in the screen.
Table of contents
(1).Introduction........................................................................................... P1
(2).Features..................................................................................................P1
(3).What's included.................................................................................... P1
(4).Operation Controls and Functions..................................................... P2
Front Panel.............................................................................................P2
Rear Panel............................................................................................. P2
Remote Control and functions........................................................... P3
(5).Installation.............................................................................................. P4
6.2 Color:
R
User:
Select to adjust to your favorite color temperature setting.
Normal:
Normal color tone setting where white is pure white. G
Warm:
Warm color tone makes white reddish.
B
0 50 100
Cool:
Cool color tone makes white bluish.
0 50 100
0 50 100
Input Connection................................................................................. P4
Value of Normal
Setting
6.3 Output:
The HDV5 can output a wide variety of PC and HD resolutions.
Refer to product specifications.
6.4 OSD Adjust:
H.Position:
Adjust the horizontal position of the OSD graphic.
V.Position:
Adjust the vertical position of the OSD graphic.
Time out:
Set a predetermined time to turn off OSD menu on the screen.
Background:
To select transparent or solid background of OSD graphic.
6.5 Information:
Project:
Show product model number.
Input:
Show resolution of the current input.
Output:
Show resolution of the output.
Date:
Show date of firmware version.
Output Connection.............................................................................. P5
(6).OSD Operation......................................................................................P6
Specifications........................................................................................ P8
7
