19
fading the microphone’s audio into the output mix. The available
adjustment range is 0 to 20 seconds.
Hold Time:
Set the length of time to wait, when no audio over the
threshold level is detected, before beginning to release the Talk
Over mix. The available adjustment range is 0 to 20 seconds.
Release Time:
Set the mixer release time, the length of time used
fading the microphone’s audio out of the output mix once the mic’s
signal level falls below the set threshold. The available adjustment
range is 0 to 20 seconds.
Reset Talk Over:
Reset all Talk Over settings back to their factory
defaults.
4) Output Mixer:
Set the microphone mixing mode of the unit.
Off
: Disable the audio mixer.
On:
Enable the audio mixer. Audio from the current source and the
microphone will be mixed together.
Mic Only:
Output only the microphone audio source. This mode
will override all other audio selections.
5) Volume On Mic Gain:
Set the microphone input’s volume level when
the microphone is an active audio source (mixed or unmixed).
6) Volume On HDMI/HDBT/Analogue Out:
Set the volume level for
each audio output type.
Note: LPCM 2.0 sources only.
7) Mute On HDMI/HDBT/Analogue Out:
Enable or disable muting the
audio of each output type.
8) HDMI/HDBT/Analogue Out Delay:
Set the amount of time (in
milliseconds) to the delay the audio output. Primarily used if audio
and video seem to be out of sync.
Note: LPCM 2.0 sources only.
9) Reset Audio:
Reset all audio settings back to their factory defaults.
OSD
2ND LEVEL
3RD LEVEL
H Position
0~100
(50)
V Position
0~100
(50)
Содержание EL-8100V
Страница 2: ......
