CYP EL-8100V, Руководство по эксплуатации

Страница: 11 / 80

6
7
LINE IN Port: Connect to the stereo analogue output of a device such
as a CD player or PC.
8
VGA 1~2 Ports: Connect to the stereo analogue output of the device
connected to the associated VGA input port.
9
IR OUT Port: Connect to an IR Blaster to transmit IR signals from the
other end of the HDBaseT connection to devices within direct line-of-
sight of the IR Blaster.
10 IR IN Port: Connect to an IR Extender to receive local IR control
signals and extend them to devices connected to the other end of
the HDBaseT connection. Ensure that the remote being used is within
direct line-of-sight of the IR Extender.
11 RS-232 BYPASS Port: Connect to a PC, laptop, or serial controllable
device with a 3.5mm adapter cable for the extension of RS-232 signals
between both ends of the HDBaseT connection.
12 INPUT CONTROL 6-pin Terminal Block: This terminal block is used
for direct source input selection. Short the ground pin (marked as
"C") with any one of the following 5 pins to make individual source
selections.
Note: The pin assignments can be changed within the WebGUI. By default,
the pins are assigned as follows:
Default Trigger Assignment
Pin 1 HDMI 1 IN
Pin 2 HDMI 2 IN
Pin 3
USB-C IN
Pin 4
VGA 1 IN
Pin 5 VGA 2 IN
13
RS-232 Port:
Connect directly to a PC, laptop, or other serial control
device to send RS-232 commands to control the unit.
14
LAN Port:
Connect directly, or through a network switch, to your
PC/laptop to control the unit via Telnet/WebGUI and to extend the
network across the HDBaseT connection.
15 DC 24V Port:
Plug the 24V DC power adapter into this port and
connect it to an AC wall outlet for power.