CYP Dante AU-DTO4-RX, Руководство по эксплуатации

Страница: 9 / 20

4
6.3 RS-232 Pinout and Defaults
Serial Port Default Settings
Baud Rate
19200
Data Bits
8
Parity Bits None
Stop Bits 1
Flow Control
None
Note: Serial control over this unit is available only via the USB Micro-B service
port on the front of the unit. Connect the unit directly to the USB port on a PC
or laptop and configure the virtual COM port to use the above settings.
6.4 Audio Routing Control
Discovery of Dante hardware and control over the behavior and routing
of Dante audio is managed via 3rd party control software or hardware.
The simplest available option is the Dante Controller software which is
freely available directly from Audinate (www.audinate.com). This is a fully
software based solution for controlling multiple audio transmitters and
receivers, in a variety of configurations, providing full and detailed control
over the audio handling of each individual unit. The Dante Controller
software is available for both Windows and macOS systems.