CYP Dante AU-DTO4-RX, Руководство по эксплуатации

Страница: 8 / 20

3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER
SYNC SERVICE
AU-DTO4-RX
2 3
1
1
POWER LED: This LED will illuminate to indicate the unit is on and
receiving power.
2
SYNC LED: This LED will illuminate to indicate the unit is actively
connected to a valid Ethernet network.
3
SERVICE Port (USB 2.0 Micro-B): This port is used for serial control
and firmware updates.
6.2 Rear Panel
B C D
ANALOG OUT
+ - + - + - + -
A
1 2
1 DANTE Port:
Connect to a standard Ethernet network switch or
router, which is hosting Dante audio sources, with a single Cat.5e/6/7
cable for reception of all routed digital audio signals.
Note: This unit is powered via PoE (802.3af) which must be supplied by
the network switch or router connected to the Dante port.
2 ANALOGUE OUT A~D 3-pin Terminal Blocks:
Connect to powered
speakers or an amplifier for analogue mono audio output.