CYP Dante AU-DTO4-RX, Руководство по эксплуатации

Страница: 6 / 20

1
1. INTRODUCTION
This 4-channel Dante audio to analogue output receiver is easy to use
and convenient to install. Thanks to the integrated support for Dante
technology which extends and routes audio across standard Ethernet
networks, this unit forms an important part of an easier and more flexible
system for managing large audio systems than traditional point-to-point
physical wiring. Dante does away with the bundles of heavy, expensive,
multi-core analogue audio cables and replaces it with low cost, and easy
to manage, Cat.5e or Cat.6 cables while maintaining the high quality
expected from uncompressed digital audio. Due to the nature of packet-
based Ethernet data transmission, there is no need to worry about the
traditional enemies of long distance audio extension, such as analogue
signal interference, crosstalk, or signal attenuation. All of this is provided
with the absolute minimum of latency (typically around 1ms).
The unit is equipped with four analogue mono audio outputs and
one Dante input port which can receive up to 4 audio channels and is
compatible with any standard Dante audio sources that might be routed
to it. It is powered directly by PoE (Power over Ethernet) which allows
for increased installation location flexibility. Basic device configuration
is provided by serial over USB while routing and network configuration
management is provided via 3rd party control software.
2. APPLICATIONS
Home Theaters
Classrooms
Lecture Halls
3. PACKAGE CONTENTS
1× 4 Balanced Out, Dante to Analogue Audio
4× 3-pin Terminal Block
1× Operation Manual