3
①
Power: Press to turn the system on/off.
②
ID: Press transmitter “ID” button and receiver “ID” button for 2 second to
connect the system. The system was already connected before leaving the
factory, so users do not need to reset it unless the system cannot up link
properly. Press
4.2 Receiver side
4.2.1 Front Panel
4.1.2 Rear Panel
①
HDMI 1/2/3 Inputs: Connect each of the input ports to the HDMI output
of your source equipment such as DVD/Blu-Ray player or set-top-box.
②
IR Blaster: Connect the IR blaster cable included in the package and
place it in front of the source equipment. The IR blaster will transmit the
infrared signal to the connected source with the existing remote signal
send to this device.
③
Power: Plug the 5V DC power supply into this unit and connect the
adaptor to an AC outlet.
HDMI IN3
HDMI IN2
HDMI IN1
DC 5V
IR
BLASTER
1
3
2
1
2
5
Power
IR
Link
Power
ID
CWHDI-RX1 Receiver
4
3
