CYP CSC-5501TX, Руководство по эксплуатации

Страница: 30 / 60

25
6.6.2 Main Page 1
Select the “MainPage1” tab to adjust settings related to audio output,
the OSD, Ethernet, and power. System reset, authentication changes
and firmware updates may also be performed from here. If desired,
the numerical value for many of the items can be entered directly by
typing it in the box above the slider bar. Press “Enter” to accept the
newly entered value.
• AUDIO
This section provides controls to set each individual audio output
type’s volume levels, and delay settings. Each output type may also
be muted independently. When the Audio Source is set to “Follow
Video” the analog audio inputs are mapped as follows: Audio 1 >
Digital video (DisplayPort, HDMI 1 and HDMI 2), Audio 2 > VGA 1,
Audio 3 > VGA 2.
Note: All audio output types share the same unified delay value when
audio delay is enabled.
• OSD
This section lets the user change the H/V positioning of the OSD, the
display timeout timer, and OSD window transparency. The information
OSD’s behavior is also controlled here with a choice between ON,
OFF, 5 seconds and 10 seconds.
•
RESET
This section allows for resetting only the output picture settings, or
returning the entire unit to its factory defaults.
•
POWER
This section allows for the unit to be powered ON or placed into stand-
by mode (OFF).