CYP CSC-5501TX, Руководство по эксплуатации

Страница: 15 / 60

10
VIDEO
2ND LEVEL
3RD LEVEL 4TH LEVEL
Auto Setup Auto Scan From HDMI2
From VGA1
From VGA2
Auto Switch OFF
On
VGA Setup Auto Setup [Current Status]
H Position 0~250
V Position 0~250
Phase 0~255
Clock 0~250 (125)
Reset
1) Video Routing: Selects the input source to display.
2) Output: Selects the output resolution to use. Selecting Native-
Cat.5e/6 or Native-HDMI will make the unit automatically select an
output resolution based on the detected EDID of the connected
display.
3) Aspect: Selects the aspect ratio to use when outputting the source.
“Full” stretches the source to fill the output resolution, regardless
of the original aspect ratio, while “Best Fit” will always attempt to
retain the original source’s correct aspect ratio by adding black
bars if necessary. “Follow In” centers the source on the screen,
without any scaling (1:1 pixel reproduction).
4) DP HDCP: Selects the HDCP logic to use with the DisplayPort input.
Setting this to “Off” will completely disable HDCP support on that
input.
5) HDMI1 HDCP: Selects the HDCP logic to use with HDMI input 1.
Setting this to “Off” will completely disable HDCP support on that
input.
6) HDMI2 HDCP: Selects the HDCP logic to use with HDMI input 2.
Setting this to “Off” will completely disable HDCP support on that
input.