CYP CSC-200P, Руководство пользователя

Страница: 1 / 12

9
(1). Introduction
Congratulations on your purchase of the Cypress Video Scaler CSC-200RS.
Our professional Video Scaler products have been serving the industry for many years.
In addition to Video Scalers, Cypress offers a full line of high quality PC multimedia,
Standards Converters, DV-to-Analog Converters,Video Mixer, Time Base Correctors,
and Video Processors. Please visit www.cypress.com.tw to learn more details about
these products. This manual includes operation information on the CSC-200RS model.
Please read this to become familiar with the CSC-200RS. and keep the manual for
possible reference in the future.
Cypress's CSC-200RS is designed to convert Composite S-Video and YCbCr signals
to a variety of computer and HDTV resolutions. It handles video input from TV systems
NTSC, PAL and SECAM TV standards. Cypress CSC-200RS has many great features to
enhance performance and is ideal for use in professional large screen presentation.
(2). Features
1. Video inputs are de-interlaced and scaled up to output resolution as below
* PC output : 640x 480, 800x 600 (SVGA), 1024 x768 (XGA), 1280 x 1024(SXGA),
* HDTV output: 852 x 480p, 852 x 576p, 1280 x 720p,1920 x 1080i
2. Automatically accommodates input video systems of NTSC 3.58, PAL and SECAM.
3. High performance adaptive 3D Comb filter Y/C separator.
4. Per-pixel motion compensated deinterlacing algorithms to produce artifact-free
progressive scan video signal.
5. Built in Adaptive film mode 3:2 pull-down provides clear and crisp de-interlacing
of video originating from 24 fps film,such as DVD movies.
6. Frame rate conversion from 50Hz up to 60Hz (PAL), or 60Hz up to 60Hz(NTSC)
7. Vertical temporal filter(VT) removes jaggy and other de-interlacing artifacts from
normal video.
8. OSD menu with adjustable control on Color, Sharpness, Brightness,
Contrast and Tint(NTSC).
9. Built-in DCTI/DLTI circuit for color/luminance transient improvement.
10. The PC loop-through allows for easy change between video and PC source.
11. Last memory for all adjustments.
12. RS-232 interface allows remote control from PC.
(3). Checking the Package Contents
The following items are contained in shipping carton:
1. Video Scaler Unit
2. DC adaptor
3. VGA Cable-HD 15 to HD 15 x 1
4. HD-15 D-Sub to YPbPr 3-RCA Cable
5. 1BNC-1BNC video cable x 1
6. S-Video Input Cable
7. YCbCr 3-RCA- to 3-RCA cable x 1
8. User Manual
9. Remote Control
10. Sample Windows Control Panel Software(RS-232 version only)
11. 2 x 4A battery
1 8
(7). RS-232 Control of the CSC-200RS Video Scaler
* Command / Response codes of RS-232 transmission:
Command Response Description
"[POWER1]" "[POWER1]" power on(normal)
"[POWER0]" "[POWER0]" power off(standby)
"[IN0]" "[IN0] Composite video input
"[IN1]" "[IN1]" S video input
"[IN2]" "[IN2]" Y PB PR/Y CB CR input
"[IN3]" "[IN3]" PC input
"[OUTPC0]" "[OUTPC0]" PC VGA output
"[OUTPC1]" "[OUTPC1]" PC SVGA output
"[OUTPC2]" "[OUTPC2]" PC XGA output
"[OUTPC3]" "[OUTPC3]" PC SXGA output
"[OUTHD0]" "[OUTHD0]" HD 480P output
"[OUTHD1]" "[OUTHD1]" HD 576P output
"[OUTHD2]" "[OUTHD2]" HD 720P output
"[OUTHD3]" "[OUTHD3]" HD 1080i output
"[OSD0]" "[OSD0]" OSD off
"[OSD1]" "[OSD1]" OSD on
"[DISPLAY0]" "[DISPLAY0]" Display off
"[DISPLAY1]" "[DISPLAY1]" Display on
"[IR0]" "[IR0]" IR sensor off
"[IR1]" "[IR1]" IR sensor on
"[PANEL0]" "[PANEL0]" Fromt panel lockout on
"[PANEL1]" "[PANEL1]" Fromt panel lockout off
"[COMB0]" "[COMB0]" 3D enhance off
"[COMB1]" "[COMB1]" 3D enhance on
"[DNR0]" "[DNR0]" Digital NR off
"[DNR1]" "[DNR1]" Digital NR on
"[ASPECT0]" "[ASPECT0]" Aspect standard
"[ASPECT1]" "[ASPECT1]" Aspect 16:9
"[ASPECT2]" "[ASPECT2]" Aspect 4:3
"[CONTRASTx]" "[CONTRASTx]" Contrast x=0~63
"[BRIGHTx]" "[BRIGHTx]" Brightness x=0~63
"[COLORx]" "[COLORx]" Color x=0~63
"[HUEx]" "[HUEx]" Tint x=0~63
"[DETAILx]" "[DETAILx]" Sharpness x=0~63
Video adjustment reset
"[RESET]" "[CONTRAST58]" "[BRIGHT31]" "[COLOR31]"
"[HUE31]" "[DETAIL10]"
Retrive video scaler all status
"[POWER?]" "[IN?]" "[OUTPC?]"
"[OUTHD?]" "[OSD?]" "[DISPLAY?]"
"[STATUS]" "[IR?]" "[PANEL?]" "[COMB?]"
"[DNR?]" "[ASPECT?]" "[CONTRAST?]"
"[BRIGHT?]" "[COLOR?]" "[HUE?]"
"[DETAIL?]"
2
(4). Connecting the hardware
The video scaler is controlled via front panel push buttons or remote control and its
status is indicated by OSD display. The front panel controls are shown below.
Front Panel
Front Panel
1. Mode: Press the button repeatedly will toggle through the following adjust controls:
Source

Resolution

Output

Aspect

3D Enhance

Digital NR

Sources....
Source mode: While under this mode, press

or

button to choose your
desired input source from Video, S-Video, or Component inputs.
Resolution mode: If output is selected as RGB, press

or

button to choose
from 640 x 480(VGA), 800 x 600 (SVGA), 1024 x 768(XGA),
or 1280 x 1024(SXGA) PC output. If output is selected as
YPbPr press

or

to choose from 480p, 576p,720P
or 1080i HDTV output.
Output mode: Press

or

to select between PC RGB output and HDTV
YPbPr output.
Aspect mode: Press

or

to choose between standard, 4:3 aspect and
wide(16:9) aspect ratio.
3D Enchance mode: To turn on or off the 3D comb filter function.
Digital NR mode: To turn on or turn off the digital noise reduction function.
Power
Picture

Mode

CSC-200P
VIDEO to PC/HDTV SCALER
11 3
4 5
2
7
(7). RS-232 Control of the CSC-200P Video Scaler
The Video Input selection and signal parameter setting for the CSC-200RS can
also be controlled via an external control system by using the RS-232 port on the
unit. If information for this control method is required,beyond the scope of the
instructions provided in this section, please contact Cypress Technology Support,
A disk is provided with the CSC-200RS containing a sample Windows Control Panel
that permits remote control of the unit from a PC via RS-232.
Note- The connection between the CSC-200RS unit and the RS-232 remote
controller is made with a modem cable.
* The Connection between video scaler and remote controller with RS-232
modem cable.
PIN
1
2
3
4
5
6
7
8
9
Definition
NC
T xD
R x D
NC
GND
NC
NC
NC
NC
PIN
1
2
3
4
5
6
7
8
9
Definition
NC
R xD
T x D
NC
GND
NC
NC
NC
NC
Video Scaler
Remote Controller


* RS-232 transmission format:
Baud Rate : 9600 bps
Data Bit : 8 Bits
Parity: None
Stop Bit: 1 bit
Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD.
(8). Specifications
Computer input (Loop thru)
Max computer input resolution
Computer input connector type
Computer input signal level
Video inputs
Video standard
Video input connectors
Scaled output resolutions
Scaled output vertical refresh rates &
Horizontal scan rates
Manual control
RS-232 control
IR remote control
Video adjustments
Weight
Dimensions
Power source
RGB with HV Sync
1600 x 1200
HD 15 Female
RGB @ 0.7V, H&V Sync @ TTL
Composite Video @ 1 Vp-p 75 ohm
S-Video @ 1 Vp-p 75 ohm
YCbCr Y : 1 Vpp 75 ohm
CbCr : 0.7 Vp-p 75 ohm
NTSC 3.58, PAL B/D/G/I
Composite video on BNC
S-Video on 4-pin Mini-DIN
Component on BNC
Pixels Format Scan
VGA 640 x 480
SVGA 800 x 600
XGA 1024 x 768
SXGA 1280 x 1024
16:9 1280 x 720p (720p)
16:9 1920 x 1080i (1080i)
852 x 480p(480p)
852 x 576p(576p)
Output resolution Vert. (Hz) Hori. (Hz)
59.94
31.469
VGA
SVGA
XGA
SXGA
480p
576p
720P
1080i
60.320 37.880
60.000
48.360
60.020
59.940
50
59.94
59.94
63.981
31.469
31.25
44.995
33.716
Front panel buttons
Via rear panel DB9F connector
Yes
Brightness, Contrast, Color Saturation, Tint (NTSC), Sharpness
1 Kgs
204(D)x 154 (W) x 46(H)mm
100~240VAC to DC 5V/2A Desktop switching adaptor
PC
Resolution
RGBHV
RGBHV
RGBHV
RGBHV
YPbPr
YPbPr
YPbPr
YPbPr
Progressive
Progressive
Progressive
Progressive
Progressive
Interlaced
Progressive
Progressive
HDTV
Resolution
3
(4). Connecting the hardware
Front Panel
2. Picture: Press the button to toggle through picture adjust parameters as follows:
Contrast

Bright

Color

Tint

Sharpness

Contrast
Contrast: Press

or

to adjust contrast level. The range of adjustment is 0~63.
Factory default value is 58.
Bright: Press

or

to adjust Brightness level. The range of adjustment is 0~63.
Factory default value is 31.
Color: Press

or

to adjust color level. The range of adjustment is 0~63.
Factory default value is 31.
Tint: Press

or

to adjust NTSC Tint level. The range of adjustment is 0~63.
Factory defaults value is 31.
Sharpness: Press

or

to adjust sharpness level.
The range of adjustment is 0~63. Factory defaults at 10.
3.

,

: Press to toggle through various adjust controls or to alter setting value.
4. IR Sensor: Infrared remote control sensor.
5. Power and LED button: Press once to power on the unit, press again to turn off.
Note:
* Under picture adjust mode, press

and

simutaneously will revert the selected
parameter back to factory preset value. Press both buttons for over 5 seconds.
will revert all picture parameters back to their factory preset values.
* You can use RS-232 to lockout the front panel controls. To lift this lockout
and revert all parameters back to factory preset value, please press"mode"
and "picture" buttons simultaneously for over 10 seconds.
6. Front Panel Lockout- Under certain circumstances it may be desirable to disable
the front panel controls. For example, to prevent
unauthorized or accidental changes to the setting while the
unit is in use.
To disable the front panel controls use RS-232 to set the
front panel lockout to ON position.
6
(6). Remote Control
1. Power: Power ON/OFF button.
2. Display: Press the button to enable or disable the on screen display
of the resolution information.
3. C-Video: Press the button to select composite video as input source.
4. S-Video: Press the button to select S-Video as input source.
5. YCbCr: Press the button to select YCbCr as input source.
6. PC: Press the button to select PC input looping through to the output.
7. VGA: Press the button to select 640 x 480 as output resolution.
8. SVGA: Press the button to select 800 x 600 as output resolution.
9. XGA: Press the button to select 1024 x 768 as output resolution.
10. SXGA: Press the button to select 1280 x 1024 as output resolution.
11. 480p: Press the button to select 852 x 480p as output resolution.
12. 576p: Press the button to select 852 x 576p as output resolution.
13. 720p: Press the button to select 1280 x 720p as output resolution.
14. 1080i: Press the button to select 1920 x 1080i (interaced) as output resolution.
15. Aspect ratio: Press the button to switch between standard, 4:3 and
wide (16:9)aspect ratio.
16 IR-Set: When IR sensor is turned off by RS-232, Press this button for
over 15 seconds will turn on the IR sensor.
17. 3D: Press to turn ON/OFF the 3D enhance.
18. NR: Press to turn ON/OFF digital noise reduction.
19. Mode: Same as "mode" button on front panel.
press to toggle through
Source

Resolution

Output

Aspect

3D Enhance

Digital NR

Source
20. Picture: Same as picture button on
front panel. Press to toggle
through Contrast

Bright

Color

Tint

Sharpness

Contrast
21. Reset: Press this button will revert picture
adjust back to factory preset value.
2 9 11 1
3
4
5
6
7
8
10
13
12
16
17
19
18
20
21
15
14
5 4
(5). Connecting and Installation (4). Connecting the hardware
Connecting the Video inputs
The video scaler can accept a composite video, an S-Video or a YCbCr input
signal for scaling, as well as a computer signal input that is passed through the unit
when the PC in (Bypass) is selected.
Rear Panel
1 . Composite Video: Use a Composite video cable to connect the composite video
output of the source equipment to the connector labeled
"C-Video" on the back of the Video Scaler.
2 . S-Video: Use a S-Video cable to connect the S-Video output of the source video
equipment to the connector labled " S-Video" on the back of the
Video Scaler.
S-Video provides improved performance over Composite Video and is
recommended over composite.
3 . YCbCr input: Use a 3 RCA-to-3 RCA YCbCr cable to connect the YCbCr output of
the source video equipment to the connectors labled YCbCr on the
back of the video scaler. Please note the plugs' color have to match
with the color of the RCA Jacks. YCbCr component provides the best
picture quality among all three inputs, and should be used whenever
possible.
4 . Computer RGB with H&V Sync: Connect the source computer's VGA output
signal to the HD 15 connector labled "PC In" on the
back of the Video Scaler.
Note: This Computer inputs signal is not sclaed, but is available for pass-through
when the Video Scaler is in the PC In (Bypass) mode.
Connecting the scaled output to your projector, PDP, or LCD Display
5 . The HD-15 D-Sub connector is shared by PC/RGBHV output and HDTV/YPbPr output.
When PC/RGBHV output resoultion (VGA to SXGA) is selected, use the HD-15 to
HD-15 VGA cable to connect the output to the PC input of your display monitor.
When HDTV/YPbPr output (480p, 576p, 720p, 1080i) is selected, use the HD-15 to
YPbPr 3 x RCA cable to connect the output to the YPbPr input of your HDTV display.
Note: Use of wrong cable for your selected output will result in an abnormal picture
on the screen.
6 . RS232: 9-pin D-sub connector for connecting to your PC or other control console for
remote control.
7 . DC power jack: 5V 2A DC power input.
2 1
3 4 5 7
6
INPUT
S-VIDEO VIDEO Y Cb Cr
PC IN
RGB/YPbPr
OUTPUT
DC 12V
+
RS 232
DC Adaptor
HDTV
Control In
INPUT
S-VIDEO VIDEO Y Cb Cr
PC IN
RGB/YPbPr
OUTPUT
DC 12V
+
RS 232
Rear Panel