CYP CR-CS2, Инструкции по эксплуатации

Страница: 14 / 24

10
10
This will connect us to the unit we wish to control. Type “help” to list the
available commands.
Note: Commands will not be executed unless followed by a carriage
return. Commands are not case-sensitive. If the IP address is changed
then the IP address required for telnet access will also change
accordingly.
11
6.7 WebGUI Control
Open a web browser on a PC/Laptop that is connected to an active
network and type the device’s IP address into the web address
entry bar. The login screen will appear and ask for a Username and
Password. The default username and password is “admin”. Please
enter the information and then click “Submit” to log in.
On the left side of the browser you will see the following menu tabs:
Extension Macro Settings, Extension Macro, Command Settings,
Network Settings, and System Settings.
6.7.1 Macro Settings
Click on the “Macro Settings” tab to execute/edit the settings for the
physical macro buttons. These macros can be executed by activating
the 8 input triggers on the back of the unit as well as via the WebGUI
or telnet.
There are 5 macros defi ned by default for testing the unit’s
functionality. Click on macros 1~5 to demonstrate various testing
functions:
• Macro 1: Sequentially close relays 1 through 8 with a 100ms delay
• Macro 2: Sequentially open relays 1 through 8 with a 100ms delay
• Macro 3: Sequentially toggle the state of relays 1 through 8 with a
100ms delay
• Macro 4: Sequentially send IR signals from emitters 1 through 8 with
a 100ms delay. The IR LED will fl ash on the front panel.
• Macro 5: Send the command "Hello World" over COM ports 1 and 2
with a 100ms delay between commands.
Macros 1~8 align with Trigger IN 1~8. When a trigger signal is activated
the unit will execute the associated macro command.