CYP CPLUS-V11PI, Руководство по эксплуатации

Страница: 8 / 20

3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER
POWER LINK
AUDIO
LOCK
4K UHD+Audio Embedder
SERVICE
L/R BYPASS
OPTICAL
1 2 3 4 5 6
1
POWER: Press this button to power the unit on or off.
2
POWER: This LED will be lit when the unit is receiving power.
Note: Press and hold the Power button for 3 seconds (until the LEDs
begin flashing) to perform a factory reset.
3
LINK: This LED will illuminate to indicate that a live source has been
detected on the input port. When no source is detected the LED
will remain off.
4
AUDIO LOCK: The LED will illuminate when a live non-LPCM source
(typically Bitstream) has been detected.
Note: When this LED is lit, please ensure that the connected HDMI
display device supports the Bitstream audio format being inserted.
5
BYPASS/OPTICAL & L/R: This switch selects the source of the
audio to be embedded in the HDMI output. “BYPASS” passes the
audio directly from the HDMI input to the HDMI output without
modification. “OPTICAL” embeds the audio from the optical S/PDIF
audio input (LPCM 2.0 or Bitstream). “L/R” embeds the audio from
the analog stereo inputs (LPCM 2.0 only).
6
SERVICE: This slot is for EDID management, control and firmware
update use. Connect directly to your PC/laptop using a standard
Mini-USB cable to connect using the PC software or to send
commands (via virtual COM port).