CYP CPLUS-V11PI, Руководство по эксплуатации

Страница: 10 / 20

5
COMMAND DESCRIPTION & PARAMETERS
SOURCEDET Show the current input source detection
state.
SINKINFO Show information about the currently
connected display.
HDCPIN N1 Set the HDCP handling mode for the HDMI
input.
Available values for
N1 :
1 [Follow Input]
2 [Follow Output]
3 [Apple Mode]
HDCPIN ? Show the current HDCP handling mode.
EDIDIN N1 Set the EDID to use with the HDMI input.
Available values for
N1 :
1 [FHD/2CH]
2 [FHD/MCH]
3
[4K UHD/2CH]
4 [4K UHD/MCH]
5 [4K UHD+/2CH]
6 [4K UHD+/MCH]
7 [User EDID]
8 [Sink’s EDID]
EDIDIN ? Show the current EDID selection.
ECHO N1 Set the console text echo mode behavior.
Available values for N1 :
0 [Text echoing is off]
1 [Text echoing is on]
ECHO ? Show the current text echoing mode.
FADEFAULT Reset the unit to the factory defaults.
VER Show the unit’s current firmware version.
REBOOT Reboot the unit.