CYP CMSI-424L, Руководство по эксплуатации

Страница: 8 / 24

3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
OUT 1 2
3 4 IN
CMSI-424L
4X4 HDMI MATRIX
POWER LOCK MENU
A B
C D
6 1 2 3 4 5
1
LCM: Displays the setting information of each input and output
setting.
2
IR Window: IR Receiver window (accepts the remote control signal
of this device only).
3
POWER: Press this button to power the device on/off. The LED will
illuminate green when the power is on, red when it is in 'Standby'
mode.
4 LOCK: Press this button to lock all the buttons on the panel; press
again to unlock. The LED will illuminate when locked.
5
MENU: Press to access the menu system for EDID and IP settings,
e.g. press once to select EDID setting from STD (internal) 1 or TV
(external) 2 then press it again to confirm the selection. Press the
the 'MENU' button to confirm the input or output selection.
6 IN/OUT and 1~4/A~D: Press the OUT button and then the number
buttons to select the required output ports, and press IN button
and then a single number button to select the required input
source, finally press the MENU button to confirm the selection.
For example, if outputs A~B need to be set to input 1 and outputs
C~D need to be set to input 2, then the following sequence of
button presses need to be performed:
Press: OUT

A

B

IN

1→MENU,
and then press: OUT

C

D

IN

2

MENU.
Note: If the menu button is not pressed the selection will not be
changed.