CYP CLUX-2HPIP, Руководство по эксплуатации

Страница: 28 / 44

23
COMMAND
DESCRIPTION & PARAMETERS
SET CHROMAKEY GREEN RANGE N1 TO N2

Set the key-out range to use for the green component of the
User defined key.
N1 = 00 ~ FF [Green min in hex]
N2 = 00 ~ FF [Green max in hex]
SET CHROMAKEY BLUE RANGE N1 TO N2

Set the key-out range to use for the blue component of the User
defined key.
N1 = 00 ~ FF [Blue min in hex]
N2 = 00 ~ FF [Blue max in hex]
GET CHROMAKEY N1 RANGE

Show the current key range set for the selected color
component.
Available values for
N1 :
RED [Red component]
GREEN [Green component]
BLUE [Blue component]
SET IN N1 HPOSITION N2

Set the horizontal position of the upper-left corner of input N1 ’s
window in pixels. The maximum position value is the current
horizontal resolution minus 1.
N1 = 1 ~ 2 [Input port]
N2 = 0 ~ {Resolution-1} [Horizontal position]
Note: Only available in dual-windowing modes.
GET IN N1 HPOSITION

Show the current horizontal position of the upper-left corner of
input N1 ’s window in pixels.
N1 = 1 ~ 2 [Input port]