CYP CLUX-2HPIP, Руководство по эксплуатации

Страница: 20 / 44

15
6.4 RS-232 Control
UNIT TERMINAL SERIAL PORT SETTINGS
Pin Pinout Pin Pinout Baud Rate 19200
1 1 Data Bits 8
2 TxD 2 RxD Parity Bit None
3 RxD 3 TxD Stop Bits 1
4 4 Flow Control None
5 GND 5 GND
6 6
7 7
8 8
9 9
6.5 Telnet Control
Before attempting to use Telnet control, please ensure that both the
unit and the PC are connected to the same active networks.
To Access the Command Line Interface (CLI)
Windows 7 Click Start , type “cmd” in the search field, and
press Enter .
Windows XP Click Start > Run , type “cmd”, and press Enter .
Mac OS X Click Go > Application s > Utilities > Terminal .
Once in the Command Line Interface (CLI) type “ telnet ” followed by
the IP address of the unit (and the port number if it is non-standard)
and then hit “Enter”. This will connect us to the unit we wish to control.
Type “ help ” to list the available commands. See below for reference.
Note: If the IP address is changed then the IP address required for
Telnet access will also change accordingly.