CYP CDPS-UH4H1HFS, Руководство по эксплуатации

Страница: 10 / 32

DRAFT
5
6.2 Rear Panel
1 2 HDMI IN 3 4 HDMI OUT
USB
RS-232
CONTROL
INFRARED OPT. IN RELAY OUT COM 1 COM 2 IN
R1 TX RX TX RX R2 R3 1 2 3 4 R4
OUT 1 OUT 2 OUT 3 OUT 4 OUT 5
R L
SPEAKER
DC 24V
5 6 12
1 2 3 4 7 8 9 10
11
1
USB: This slot is reserved for firmware update use only.
2
CONTROL: Connect from PC/Laptop with active internet service
for Telnet or WebGUI control with RJ-45 terminated cable.
3
RS-232: Connect from PC/Laptop for RS-232 command sending to
control the device.
4
INFRARED OUT 1~5: Connect with IR Blaster for IR signal transmitting.
5
HDMI IN: Connect from source equipment such as Blu-ray/DVD/
PS3 players, Set-Top-Box or any HDMI equipped source device
for input signal sending. This device has source auto-detection
function from the latest input and when the latest input has been
pulled out it will follow the number sequence.
6
HDMI OUT: Connect to HDMI TV/display or HD Amplifier for output
image and or audio display.
7
OPT. IN: This slot is to connect with audio source equipment such as
Blu-ray/PS3 player for audio signal input through optical cable.
8
COM 1~2: Connect from other devices that are to be controlled
with 3.5mm terminal block cable for control through RS-232
commands.
9
RELAY OUT R1~4: Connect with control device’s DC power such as
curtain or projector screen.
10
TRIGGER IN 1~4: Connect with event device’s signal lines such as
window security alarm, door switch, and etc… for trigger signal
sending back to Control System and or run the macro commands.