4
4
Link Pair Select
This dip switch allows user with multi-pair setting for link up to 16
pairs of the devices with single IP router. Each pair must have the
same dip switch setting in order to pair to the right device setting.
The factory default setting is at 0000. (This function is not available
yet with the first generation of the product)
Note:
To activate the setting a re-power on is required after each
new setting.
5
USB Link button
Press this button to allow the receiver to be link up or unlink
with the transmitter’s USB input.
Note:
To activate the link a re-power on is required after each
button pressed.
6
CAT5e/6 Out
This slot is to connect with CAT5e/6 cable with receiver side’s
CAT5e/6 input. When both transmitter and receiver is connected
the green LED will illuminate. When the data is sending the yellow
LED will be blinking.
6.3 Rear Panel
3
1
USB 1~4
These slots are where you connect your devices, such as keyboard,
mouse, USB storage device or etc with USB cables.
