49
Booster function „P”
The Booster Function increases the nominal power of the Ø 210 mm cooking
zone from 2300W to 3000W and the Ø 160 mm cooking zone from 1200W
to 1400W.
In order to activate the Booster function, select the cooking zone, set the heat
setting to "9" and then touch the "+" (
2
) sensor field again. The letter "P" will
be shown on the display.
To deactivate the Booster function, touch the "" (
4
) sensor field to reduce the
heat setting or lift the cookware from the cooking zone.
For 210 mm and 160 mm cooking zones, operation of the Booster func
tion is limited to 10 minutes. Once the Booster function is automatically
deactivated, the cooking zone continues to operate at its nominal power.
The Booster function can be reactivated, provided the appliance electronic
circuits and induction coils are not overheated.
When the pot is lifted from the cooking zone when the Booster function
is in operation, it remains active and the countdown continues.
When the appliance electronic circuits or induction coils overheat when
the Booster function is in operation, it is automatically deactivated. The
cooking zone continues to operate at its nominal power.
Switch off the appliance
● The appliance operates when at least one cooking zone is on.
● To switch off the appliance touch the on/off
sensor (
1
).
If a cooking zone is still hot, the relevant display (
3
) will show the letter "H"
to indicate residual heat.
Switch off cooking zones
● A given cooking zone must be active. Heat setting display pulsates.
● To switch off a cooking zone touch the on/off sensor field or touch the
sensor (
5
) for 3 seconds.
2
3
1
6
4
3
9
5
7
5
8
8
10
