48
Control panel
• Immediately after the appliance is connected to electrical mains, all displays
will light up briefly. Your induction hob is then ready for use.
• The induction hob is equipped with electronic touch control sensor fields,
which are operated by touching with a finger for at least 1 second.
• Touching of a sensor field is accompanied by an acoustic signal to
acknowledge.
No objects should be placed on the sensor fields (this could cause an error).
Touch sensor fields should be always kept clean.
Switching on the cooking zones
Once the appliance is switched on using the on/off touch sensor (
1
), select a
cooking zone (
5
) within the next 10 seconds.
1. When a cooking zone selection sensor field (
5
) is touched, "
0
" on the cor
responding heat setting indicator display will pulsate.
2. Set the desired heat setting using the "+" (2) or "-" (4) sensor fields.
Switching on the appliance
To switch on the appliance touch and hold the on/off sensor field (
1
) for at
least 1 second. All displays (
3
) will show the number "
0
".
If none of the sensor fields is touched within 10 seconds, the appliance
switches itself off.
Selecting the cooking zone heat setting
When the cooking zone display (
3
) shows pulsating “0”, start setting the de
sired heat setting using the "+" (
2
) or "" (
4
) sensor field.
If none of the sensor fields is touched within 10 seconds of switching
on the appliance, the cooking zone switches off.
A cooking zone is active when its display shows a digit or a letter. This indi
cates the cooking zone is ready for the heat setting to be set or changed.
2
3
1
6
4
3
9
5
7
5
8
8
10
