EN - 29
Your fridge is delivered to you with the
cover shown in the open position.
Declared energy consumption and volume
are defined according to the Chiller option
of the product.
To use for 0 °C department:
If you want to use this compartment as a
0 °C box, you must take the sliding cover
(indicated in the picture) from the closed
position to the open position.
To use for Crisper department:
If you want to use this compartment as a
Crisper, you must take the sliding cover
(indicated in the picture) from the open
position to the closed position.
While this department is used as a 0
°C department, keeping food in the
Chiller, compartment instead of the freezer
or refrigerator compartments, allows food to
retain freshness and flavour for longer,
while preserving its fresh appearance.
When the Chiller tray becomes dirty,
remove it and wash with water. Water
freezes at 0°C, but food containing salt or
sugar freezes at temperatures lower than
this. The Chiller compartment can be used
for storing foods such as raw fish, lightly
pickled food, rice, and so on.
Pull the chiller shelf out towards you.
The cover will open automatically.
Do not put food you want to freeze or ice
trays (to make ice) in this compartment.
3.5.3 The Fresh Dial
(In some models)
(The images are representative)
or
(The images are representative)
If the crisper is full, the fresh dial located
in front of the crisper should be opened.
This allows the air in the crisper and the
humidity rate to be controlled, to increase
the life of food within.
The dial, located behind the shelf, must be
opened if any condensation is seen on the
glass shelf.
3.5.4 Adjustable Door Shelf
(In some
models)
Six different height adjustments can be
made to provide storage areas that you
need by adjustable door shelf.
To change the position of adjustable door
shelf ;
Hold the bottom of the shelf and pull the
buttons on the side of
the door shelf
direction of arrow.
(Fig.1)
Position door shelf
the height you need
by moving up and
down. After you get
the position that you
want the door shelf,
release the buttons on
the side of the door
shelf (Fig.2) Before
releasing the door
shelf, move up down
and make sure the
door shelf is fixed.
Note:
Before moving door shelf is
loaded, you must hold the shelf by
supporting the bottom. Otherwise, door
shelf could fall off the rails due to the
Fig. 1
Fig. 2
