
EN
49
CLEANING
EXTERIOR SURFACES
•
Clean the surfaces with a damp microfibre cloth. If
they are very dirty, add a few drops of pH-neutral
detergent. Finish off with a dry cloth.
•
Do not use corrosive or abrasive detergents. If any
of these products inadvertently comes into contact
with the surfaces of the appliance, clean immediately
with a damp microfibre cloth.
INTERIOR SURFACES
•
After every use, leave the oven to cool and then clean
it, preferably while it is still warm, to remove any
deposits or stains caused by food residues To dry any
condensation that has formed as a result of cooking
foods with a high water content, let the oven to cool
completely and then wipe it with a cloth or sponge.
•
Clean the door glass with a suitable liquid
detergent.
•
The oven door can be removed to facilitate
cleaning.
ACCESSORIES
Soak the accessories in a washing-up liquid solution
after use, handling them with oven gloves if they are
still hot.
Food residues can be removed using a washing-up
brush or a sponge.
CLEANING THE REAR WALL AND THE CATALYTIC PANELS
This oven is equipped with special catalytic panels that
facilitate cleaning of the cooking compartment thanks to
their special self-cleaning coating, which is highly porous
and able to absorb grease and grime. These panels are
fitted to the shelf guides: When repositioning and then
refitting the shelf guides, make sure that the hooks at the
top are slotted into the appropriate holes in the panels.
To make best use of the catalytic panels’ self-cleaning
properties, we recommend heating the oven to 200 °C
for around one hour using the “Convection Bake”
function. The oven must be empty during this time.
Then leave the oven to cool down before removing
any remaining food residues using a non-abrasive
sponge.
Please note: Using corrosive or abrasive cleaning agents,
stiff brushes, pan scourers or oven sprays could damage the
catalytic surface and compromise its self-cleaning properties.
Please contact our After-sales Service if you require
replacement panels.
LOWER THE TOP HEATING ELEMENT
1.
Remove the lateral shelf guides.
2
1
2.
Pull the heating element out a little and lower it.
3.
To reposition the heating element, lift it up, pulling
it slightly towards you, making sure it comes to rest
on the lateral supports.
Do not use steam cleaning
equipment.
Use protective gloves during all
operations.
Carry out the required
operations with the oven cold.
Disconnect the oven from the
power supply.
Do not use wire wool, abrasive
scourers or abrasive/corrosive
cleaning agents, as these could
damage the surfaces of the
appliance.
Содержание IBU 96 RFS
