Operating Instructions | CFM 600
6
4. OPERATING INSTRUCTIONS
4.1 Automatic paper feeding
Insert the feeding board arrestment lever
5
into its lower position. Feed the paper on the tilting board
4
–
being tilted away at the moment, placing it between side guides
11
which are set approximately to the
required paper width.
Then push the side guides towards the paper. Release the arrestment lever, which allows the feeding board
to lift up the stack of paper underneath the feeding wheel
14
.
Turn on the machine with using the power switch
16.
If the machine is ready to work the red LED
6
shines
continuously. If the LED light is blinking, either the stops are in incorrect position, or there is a paper
missing on the feeding tray:
a) LED blinks 1 x – incorrect position of stop X
b) LED blinks 2 x – incorrect position of stop Y
c) LED blinks 3 x – missing paper on feeding tray
In case paper jams in the machine, the motor turns off automatically and LED light starts blinking
intermittently 4 x. In such case it is necessary to remove the paper from the machine and restart it – to tur
nit off and on again.
After pressing the “start/stop” button
1
, the paper will be fed automatically from the pile of paper and folded
into the waste box. The folding speed is regulated by the button of control speed
2
. When the last sheet
leaves the machine, the machine turns off automatically.
4.2 Stops adjustment, fold type setting
Types of foldes
Each type of paper folding requires the precise setting of the sheet stop rider
13
at the X and Y stops,
following the information in the table of folding options
15
. ‘Single’ folding requires that the Y stop is inserted
in the machine in the opposite way. After of the stops the machine turns off automatically.
The Y stop turned 180° for
1/2 fold
