4
3
SAFETY AND WARNINGS
BEFORE YOU START
Upon unpacking, please check the contents against the packing list.
Do not touch the motor or brakes on the scooter when in use or directly
after
use as these parts can become extremely hot.
Keep this scooter out of reach of children when you store it away. Always keep in mind that this scooter
is intended for ride by people of
6
years of age or older who have good common knowledge about riding
and riding skills.
RIDING PRACTICES AND CONDITIONS
Check and obey any local laws or regulations which may affect the locations where the power scooter
may be used.
Always be careful and cautious when riding! Watch out for possible obstacles that
may
catch the wheels
,
force a sharp turn
,
or make you lose control. Also steer clear of pedestrians or other wheel
ed
products
s
uch as roller-skater
s
, skateboard
ers
, and bicycle
s,
and be mindful of kids or animals that may
run into
your way
at any time
.
Do not activate the speed control on the hand grip unless you are on the scooter in a safe, outdoor
environment that is suitable for riding.
Do not attempt to perform stunts or tricks on this scooter. This product is not designed to withstand
abuse from jumping, curb grinding or any other misuse or stunts.
• Always keep both of your hands on the steering handle when riding!
• Never allow more than one person to ride the scooter! Never use it to tow anybody or anything!
• Never ride the scooter near a staircase opening, water pond, or swimming pool!
• Keep your fingers and any other part of your body off the motor, wheels, and other rotating components!
• Never use a phone or wear
head
phone
s
when riding!
• Steer clear of pedestrians and vehicles!
•
Keep away from
water and puddles to prevent
the motor and other electronics
getting wet
, leading to
fire or other hazards due to short-circuit
s when charging.
• Ride on flat, dry ground such as a sidewalk or on a flat space free of sand, leaves, rocks, or gravels.
Water, mud, ice, bump
s
, or uneven ground could cause loss of control. Do not speed while riding
downhill
or
the scooter might get out of control.
• Do not ride at night or in places of limited visibility.
• Do not ride indoors or on surfaces that could become damaged such as carpet
s
or glossy flooring.
• Be sure to regularly inspect and service the scooter after riding and make sure all the
components and
warning labels are in good condition.
• Check that all the fasteners and bolts are in proper position before each riding.
•
Riding this scooter is not advisable for persons with heart disease, pregnant women, sick persons,
handicapped people, or those who have recently
had surgery, due to possible diminished capability
.
• After unpacking this product
,
and before you first ride it,
it must be c
harge
d
for 12 hours. Do not
overcharge it,
or
the service life of the battery and the charger may be compromised.
• Before each ride, please check the scooter for:
* The functionality of the braking system;
* The
proper
position of all the components and any dislocation relative to their factory position;
* Only original or authorized compatible parts and components shall be used in repairing and servicing;
and installation shall be performed by the dealer or other skilled people.
• Maximum operating speed
of this scooter is
12km/h
USE THE CHARGER
1.
Check the charger regularly for any possible damage
to
cord, plug, cover, or other parts. If any is found,
do not use the charger until it has been repaired or replaced.
2.
Only use a charger supplied or recommended by our company!
3.
The charger is not a toy and
must only
be used by an adult
.
4.
Never charge when flammable materials or liquids are nearby!
5.
Disconnect the power cord and unplug from the scooter when charging is completed!
6.
Charge the scooter
only
for
the
time period
that is
recommended. Do not overcharge it!
7.
Always disconnect the charger before wiping or cleaning the scooter!
FAILURE TO HEED TO THE WARNINGS LISTED ABOVE INCREASES RISK OF POTENTIAL
SERIOUS
INJURY. USE THE APPROPRIATE CAUTION WHEN RIDING AND ALWAYS WEAR
PROTECTIVE
GEAR WHEN RIDING.
ESTIMATED TIME FOR ASSEMBLY
• Assembly can typically be completed in 25 minutes, not including the time of charging for the first time.
• Time of charging is 7 hours for the first time.
REQUIRED TOOLS
1.
Th
rottle
knob
2.
Power switch
3.
Brake pedal
4.
Charging socket
1
2
3
4
1pc 12--14mm open spanner
(Not provided along with
the scooter)
1pc 13--15mm open spanner
(Not provided along with
the scooter)
2pcs 4mm
hex keys
(Provided along
with the
scooter)
1pc 4mm socket hexagon
spanner (Not provided along
with the scooter)
1 pc Philips screw driver
(Not provided along with
the scooter)
Before assembling the scooter, please make sure power switch is turned
‘OFF’.
