Cyclops Lighting PR-250T, Руководство пользователя

Страница: 9 / 15

9 V1.47
Control menu
The information menu will appear after the fixture is switched on. In this menu, the following status is
displayed:
Main Menu
Press the MENU button to enter the Main Menu interface.
Menu
DMX
Advance
Mode
Dimme r
Addressing
All fixtures should be given a DMX starting address when using a DMX signal, so that the correct fixture
responds to the correct control signals. This digital starting address is the channel number from which
the fixture starts to listen to the digital control information sent out from the DMX controller. The allocation
of this starting address is achieved by setting the correct number on the display located on the base of
the device.
You can set the same starting address for all fixtures or a group of fixtures, or make different address for
each fixture individually.
If you set the same address, all the units will start to listen to the same control signal from the same
channel number. In other words, changing the settings of one channel will affect all the fixtures
simultaneously.