background image

14

V1.47

Troubleshooting

Listed below are a few common problems that you may encounter, with solutions.

The fixture does not work, no light

• 

Check the connection of power and main fuse. Be sure the external fuse has not blown.

• 

Measure the mains voltage on the main connector.

Model

PR-250T

Light source:

500W COB LED 250 watts Warm white

 

                                                   

Technical specifications

 

                                                   

Control pr

otocols:  

                           

Net weight:

C

olor:

IP rating:

O

perating temperature:

Rotary, DMX,Rotary

2, 3, CHs
AC100

-240V/50-60Hz

3 pin XLR In/Out male and female

PowerCon In/Out

745 x 294 x 294mm
8.7 Kg (including lens)

Black
20
-5°C/45°C

Control channels:

Input voltage:

DMX connections:
Power connections:
Dimensions:

+ 250 watts Cool white LED

LED Color temperature:

 2700K-5600K

LED life expectancy:

50,000 Hrs.

CRI:

97, R9≥90

TLCI:

≥98

Manual zoom
Zoom range: 

18° to 38° (optional 5°-10° or 9°-18°profile lenses)

Light output

5000 Lux @ 2m @ 18°

Optional Fresnel lens adapter 25°-50° (PMMA)
Color mixing: 

Tunable white

5 Dimmer curves
Strobe

Video flicker free with selectable PWM

Intelligent temperature control

Silent operation

Содержание PR-250T
















Отзывы: