CONFIGURATION & CONNECTORS
2-6
2400-31 FEP Maintenance & Support Guide
Revision 1.0, March 2005
The DC power wiring harness to 600-2400-31-D0 should use 14 AWG wire and the color code as
follows:
2.3.1.2
AC Power Connectors (600-2400-31-A0)
The AC power connector is a 3-pin connector. See Figure 2-5.
The power Connector is a standard IEC type recessed power receptacle.
Figure 2-5. AC Power Connector
2.3.1.3
Ground Studs
There are two #10-32 threaded studs (with hex nuts, flat washers and star washers included) attached to
the chassis of the 600-2400-31-A0 and 600-2400-31-D0. Ring lugs should be used to attach chassis
ground to the ground studs. Table 2-4 shows AMP/Tyco part numbers for typical ring lugs for #10
studs.
Color
Signal
Contact
Red
-48 VDC
A
Black
-48 VDC Return
B
Green/Yellow
Chassis ground
D
Table 2-4. Ring Lugs for #10 Studs
Wire Gauge
AMP/Tyco Part
14-16 AWG
320630
10-12 AWG
36161
Neutral
Live
Ground
