Cyclone Analogic Bass Bot, Руководство по эксплуатации

Страница: 13 / 28

11
Note Order “Down” LED “Up” LED
Up (Ascending) OFF ON
Down (Descending) ON OFF
Up/Down ON ON
Random BLINKING BLINKING
Table of activation keys for the four note orders styles in the Bass Bot Arpeggiator..
Tip!
You can also control the arpeggiator from an external MIDI controller.
Copy Arpeggiator Pattern
New in OS 2.0!
Perform these steps to save your Arpeggiator output as a new pattern:
1. While in Arpeggiator Mode's pattern selection menu, press [FUNCTION] + [CPY] to save the
arpeggiated version of your pattern that is currently playing to the clipboard.
2. Select the destination pattern group, section, and number for your new pattern. This can be done
while in Arpeggiator Mode or you can switch to Pattern Write Mode.
3. Press [FUNCTION] + [PST] to paste the new pattern from the clipboard into pattern memory.
Tip!
Pattern colors can be changed while in Arpeggiator Mode using [FUNCTION] + [LED].
Lesson 12
MIDI Functions
External Control of the Bass Bot
The Bass Bot can be controlled by an external MIDI controller or sequencer. Simply connect the MIDI OUT
from another device to the Sync/MIDI jack on the back of the Bass Bot. Switch the Mode selector switch to
the MIDI setting.

The Bass Bot responds to MIDI Note On commands, assuming the note’s pitch is within the Bass
Bot’s range. See the InstaDJ 2.0 MIDI Implementation Chart at the end of this document..

MIDI notes with a velocity value above 112 are considered to be accented notes.

MIDI notes that overlap (a second note begins before the first note ends) are considered to be tied
together, and the result will be similar to a note that has the slide modifier applied.

MIDI notes can also be used activate patterns. See Lesson 16 for details.
Tip!
In MIDI mode, you can also ‘play’ the Bass Bot using the keyboard and DUAS keys.
Synchronization to an External MIDI Clock
The Bass Bot will automatically sync its sequencer to a MIDI clock received from an external MIDI source,
such as the Drum Drone TT-606 or a computer. The Bass Bot will be under the control of the external
device when it detects an incoming MIDI clock. It will respond to external start commands, stop commands,
continue messages, and clock information.