Page 5 of 5
WallRack
“Strut
-
Mount”
Installation
{Continued}
h)
Insert a
3/8-16NC BHCS #12724
thru the top hole of the WallRack and place
a
3/8-16NC Strut Nut #17525
into the Spanner behind the screw and hand
tighten,
and do the same for the bottom hole which is 12” cent
er-to-center
from the top hole
i)
Using a drill with the
T-45 Torx Driver
and holding the
Strut-Nut #17525
in-place while holding the rack perpendicular with the spanners tighten
both screws
j)
Repeat steps “
g
” thru “
i
”
for all the
WallRacks
on these
Strut Spanners
k)
Repeat steps “a” thru “
j
” as necessary to complete the wall installation
using a Blue Line or Laser Level
