Cycle Torch GT 800, Руководство пользователя

Страница: 4 / 8

4
cable in the even the light is twisted around the handlebar. Excess wire maybe be
wrapped around the handlebar or secured within the Velcro strap.
When using the helmet mount for the light, the battery is designed to be
carried in a jacket pocket or a pack that you are wearing.
CAUTION: Do not connect a helmet mounted light to a bike mounted battery.
Headlamp mount: The headlamp mount may be used for a variety of mounts
with the included long Velcro straps. It is designed in such a way that the light is
easily removed using the rubber ring similar to mounting on the handlebar.
You may find it advantageous to use both a handlebar mounted light and a
head mounted light. The head mount provides the additional safety and flexibility
to point the light quickly in any direction your head points.
Aiming the light: When using any mounted light, insure that the mounting
does not project the beam directly into the eyes of oncoming motorists or cyclists.
III. How to charge GT 800
CAUTION
1. Battery Charger is for use only with the included Li-pol battery pack. Trying to
charge other than the included battery pack may cause batteries to catch fire,
overheat leak or explode. Do not charge the battery with other approved charger
for this model.
2. Do not expose charger to rain or moisture.
3. Although the battery pack may be left on the charger longer than 24 hours
without damaging the battery pack, if the battery is not going to be used for an
extended period, the battery life and capacity will be better preserved by
discharging the battery to approximately half of capacity and then disconnecting
and storing. Every 3 to 4 months connect battery to light and use up the
remaining capacity in the battery and then charge to 50% capacity before
continuing storage.
I.
II
.
III
.
IV
.
V
.
VI
.
VII
.