Cycle Protect The Liberator, Инструкция по установке и эксплуатации

Страница: 13 / 15

6) Once you have plugged the wiring harness into the Cycle Protect Box the following
items will occur.
a. Three status lights will begin to illuminate on the Cycle Protect Box
(opposite end of the wiring harness). When all three lights are illuminated
it indicates that you have;
i. +12 volts power
ii. GPS satellite lock
iii. GSM communication with the cell network
(If none of these lights turn on, then tilt the box by about 2-5 degrees to activate the
accelerometer)
b. The alarm in process LED will illuminate RED
Alarm Status Indicator Light
Page 12