CyboEnergy CI-Mini-1000A, Руководство пользователя

Страница: 14 / 32

14
Copyright 2019 by CyboEnergy
Installation Procedure – 8 Steps
Understand the wiring change. Know your water heater 1
(a) Inside, or (b) Outside. Wire AC to the Heater 3
One switch per AC circuit. Install an Outdoor AC Switch 2
Make DC connections. Connect to Solar Panels 7
Hang on a wall or mount on rails. Mount CyboInverter 5
Inspect and turn on. Commission the System 8
To save electricity. Set Thermostat Setpoints 4
Run a bare grounding wire. Ground the System 6
Step Note No
Parts Included: an Off-Grid CyboInverter H model or a Twin Pack.
Parts Required: a switchable AC junction box with outlet or an AC switch,
an 8 AWG bare grounding wire, screws and nuts, and basic tools. If the
CyboInverter is mounted outside, an outdoor AC junction box is required.