CYBIOLINK CY-368B-SB, Руководство пользователя по установке и эксплуатации

Страница: 27 / 51

26
TO MAKE A CALL
Dial Direct
Press [Speakerphone] on the base unit or [Talk] / [Spk.]
on the handset and listen for the dial tone. The
“In-Use” indicator on the base unit will be turned ON.
Use the keypad to dial the phone num ber. The phone
num ber will be shown on the display along with the call
tim er. Press [Speakerphone] on the base unit or
[OFF] on the handset to end your call.
Pre-dial
Pre-dial allows you to key in the phone num ber and verify it before dialing out.
Use the keypad to key in the phone number. To edit
the num ber on the display, press [DELETE] to clear
wrong input.
Press [Speakerphone] on the base unit or [Talk] / [Spk.]
on the handset to call the number. The call timer will
start counting. Press [Speakerphone] on the base
unit or [OFF] on the handset to end your call.
TO ANSW ER A CALL
This phone is default to Auto Answer mode. To answer a call, if the handset is on the
charge cradle, just lift the handset and the line is automatically connected.
--- OR ---
This phone can also be set to Manual Answer m ode. To change the Answer Mode
setting, please refer to page 22. After set to Manual Answer m ode, or whenever the
handset is not on the charge cradle; to answer a call, lift the handset and press [TALK].
* Alternatively you m ay press [Spk.] on the handset or [Speakerphone] on the base unit
to answer regardless of Answer Mode setting.
If caller ID service is subscribed from your local phone com pany, the handset will display
the caller’s num ber (or with the name) between the first and second ring. You m ay look
at the information on the display to decide if it is a call you want to answer.
PHONE ON
SERVICE DIR. DI AL V.M.
PHONE ON
1234568
00:01
3W AY
SERVICE
1234568
O.K. EXI T DELETE
SAVE
PHONE ON
1234568
00:01
3W AY
SERVICE
BAS IC O PE RAT IO N