CYBIOLINK CY-368B-SB, Руководство пользователя по установке и эксплуатации

Страница: 24 / 51

23
PBX Mode
If you use an in-house phone system, you may have to dial an external access code
before placing an outgoing call. Follow the steps below and enter that code in the PBX
PREFIX field. This code will then be added to all stored numbers when dialing out.
Press [MENU].
Using [▼] or [▲ ] to select “PBX MODE”.
Press [O.K.] to enter into the selection.
Using [▼] or [▲ ] to enter a digit number for outgoing
calls.
Press [SAVE] to confirm, and then press [EXIT] to
return.
Note: The phone will automatically screen all Pre-dial numbers prior to dialing out if
PBX Prefix is set. Enter the access code and the phone number you wish to dial, the
phone will automatically insert a ‘pause’ after the first digit when dialing out the number.
On the contrary, if the first digit is not the access code, the system will classify it as an
internal call and dial out the displayed number only.
New Call Lamp
Press [MENU].
Using
[▼] or [▲ ]
to
select “NEW CL LAMP”.
Press [O.K.] to enter into the selection.
Using
[▼ ] or [▲ ]
to
turn the New Call Lamp ON or OFF.
Press [SAVE] to confirm, and then press [EXIT] to
return.
PBX MODE
O.K. EXIT
PBX PREFIX:
_
EXIT
SAVE
NEW CL LAMP
O.K. EXIT
NEW CL LAMP IS OFF
EXIT
SAVE
ME N U S E T T IN GS