CYBEX VR2 Скачать руководство пользователя страница 9

Страница: 9 / 230

Hardware

• All 3/8" socket head cap screws shall be of grade 8 (or equivalent). All bolts shall be either

chromed or zinc plated for additional corrosion resistance.

Weight Stack Guards

• All weight stacks shall be guarded on the backside to prevent bystanders from inadvertent

contact with the weight stack during use.

Cushion/Upholstery

• A superior grade of Naugahyde from Gencorp (or equivalent) shall be used on all pad

covers and wear covers.

• The color shall be sulfide stain resistant.
• All edges shall be stitched to eliminate any folds in the material that would limit durability.
• Cushions come with replaceable slipcovers on all high use areas, reducing maintenance

expense by not having to replace the entire cushion.

• Cushion foam consists of a combination of high and medium density closed-cell Omalon

polyurethane, for durability and comfort.

Adjustments

• Recessed high contrast Lexan decal for all seat and pad adjustments for maximum

readability.

Instructional Placard

• Shall provide step-by-step instructions and a picture to illustrate use, visible from the

exercise position.

• Placard shall indicate proper positioning, details muscles trained and clearly describe the

correct use of machines.

Equipment Anchoring

• Each machine shall be equipped with a provision for anchoring it to the floor.

Cybex VR2 Owner’s Manual

Technical

Specifications

Page 1-3

Содержание VR2







































































































































































































































Результаты поиска

Содержание VR2

Отзывы:

Похожие инструкции для VR2

Бренды по названию

Популярные бренды

CYBEX VR2, Руководство владельца и по обслуживанию

Результаты поиска

Содержание VR2

Отзывы:

Похожие инструкции для VR2

Бренды по названию

Популярные бренды