CYBEX VR2 Скачать руководство пользователя страница 68 | Manualshive

Страница: 68 / 230

CYBEX VR2 Скачать руководство пользователя страница 68

The Machine

•

Accommodating Grip - The outer handles

pivot to maintain proper wrist alignment
throughout the motion of adduction.

•

Plane of Motion - The “straight bar”/outer handles allow

full motion in the frontal plane (adduction). The
parallel/narrow handles are specifically designed to allow
motion in the sagittal plane (extension). Motion in the
sagittal plane (narrow grip pulldown) is considered more
functional and safer for the shoulder. The two individual
handles allow the user to pull through the center of the
body or through the front. The detrimental and minimally

effective “behind the neck” position should be avoided by

leaning back slightly.

•

Range of Motion - The dual-axis technology allows a

greater range of motion in the frontal plane (wide
pulldown) than any other machine by allowing the user to start directly overhead and move
outward, then down, then in toward the sides. The user also has the ability to perform a
narrow grip pulldown of varying widths ranging from several inches to shoulder width.

•

Variable Resistance - The machine provides maximum resistance at the beginning of

motion and appropriately decreases the resistance to allow full contraction at the end.

•

Two Directions of Resistance - The dual-axis technology functions in the wide grip

pulldown to not only provide resistance against the downward movement (by pulling

upward against you) but also to provide resistance against the outward motion at the top of
the wide movement (by pushing the hands together). By providing two directions of
resistance within the frontal plane latissimus stimulation is increased and the elbow flexors
are de-emphasized.

NOTE: Less weight will be employed when the handles are moved outwards due to the
multiple directions of resistance and the increased muscular effort required of the lats.

•

10 to 305 Pounds by Fives - The top plate provides a minimum weight of ten pounds.

Subsequent plates in the weight stack are twenty pounds each. Three “slide-on” five pound
incremental plates are securely positioned for easy access and effortless addition thereby
providing 10 to 305 pounds in five pound increments.

CYBEX VR2 Owner’s Manual

Exercise

Page 3-37

Pulldown - Dual Axis

«
...
66
67
68
69
70
...
»

Содержание VR2







































































































































































































































Отзывы:

Нет отзывов